logo
  arrow-down
search
0 search
Your shopping cart is empty.
Home
Electric actuators
Nuclear power plants
Multi-turn
STANDARD ATOM
Electric multi-turn servo drive MO 4-A

Electric multi-turn servo drive MO 4-A

Electric multi-turn servo drive MO 4-A

Typové číslo: 160
Industry use: Energy
Enclosure: IP 67, IP 55
Trip torque: 120 to 500 Nm
Rebuild speed: 16 to 180 min−1
Scope of work. of revolutions: 1 to 685
Weight: 38 to 50 kg
Ambient temperature: -50 to 60 °C
Connecting flange: F14
Work position: with the motor axis in a horizontal position (deviation +/-15°)

Hi, my name Is Marko. I will be happy to help/advise you

Ing. Marko Čižmárik

Standard equipment

  • Supply voltage 3x400 V AC
  • Terminal connection
  • 2 torque switches
  • 2 position switches
  • 2 additional position switches
  • Heating resistor with thermal switch
  • Mechanical flange connection
  • Local locator
  • Blocking of torque switches in end positions
  • Manual control
  • Protection IP 55

Advanced equipment

  • Supply voltage 3x380 V AC
  • Reversing contactors
  • Position transmitter with signal:
    • resistance 1x100 Ω, 1x2000 Ω, 2x100 Ω, 2x2000 Ω
    • current 0/4 to 20 mA from R/I converter (with/without source)
    • current 4 to 20 mA (capacitive transmitter with/without source)
  • Mechanical connection:
    • ISO 5210, form A
    • other non-standard
  • Protection IP 67

Similar products

Knife sliders

Light: DN 50, DN 1000 Work pressure: PN 10/16 Operating temperature: 70 °C Connection parameters: PN EN 0192-2, DIN 2501 Materials: Monolith body - ductile iron EN-GJS-400-15 (GGG-40), Wedge – fully rubberized with antibacterial EPDM, NBR, Spindle - corrosion-resistant steel 1.4021 (13% Cr), O - rings - NBR, Spindle nut – forged brass
Light: DN 50, DN 1000 Work pressure: PN 10/16 Operating temperature: 70 °C
View product View btn-arrow-small

Soft-sealing wedge sliders

Light: DN 40, DN 1200 Work pressure: PN 10/16 Operating temperature: 70 °C Connection parameters: EN 0192-2 with flanges type 21, shape B Construction length acc: 15 – according to PN-EN 558+A1, F5 (DIN 3202), 14 – according to PN-EN 558+A1, F4 (DIN 3202)
Light: DN 40, DN 1200 Work pressure: PN 10/16 Operating temperature: 70 °C
View product View btn-arrow-small

Category products

Electric multi-turn servo drive SO 2-A

Industry use: Energy Enclosure: IP 67 Trip torque: 5 to 100 Nm Rebuild speed: 10 to 40 min−1 Scope of work. of revolutions: 0.5 to 500
Industry use: Energy Enclosure: IP 67 Trip torque: 5 to 100 Nm
View product View btn-arrow-small

Electric multi-turn servo drive MO 3-A

Industry use: Energy Enclosure: IP 67, IP 55 Trip torque: 25 to 250 Nm Rebuild speed: 10 to 95 min−1 Scope of work. of revolutions: 1.4 to 685
Industry use: Energy Enclosure: IP 67, IP 55 Trip torque: 25 to 250 Nm
View product View btn-arrow-small

Electric multi-turn servo drive MO 4-A

Industry use: Energy Enclosure: IP 67, IP 55 Trip torque: 120 to 500 Nm Rebuild speed: 16 to 180 min−1 Scope of work. of revolutions: 1 to 685
Industry use: Energy Enclosure: IP 67, IP 55 Trip torque: 120 to 500 Nm
View product View btn-arrow-small

Electric multi-turn servo drive MO 5-A

Industry use: Energy Enclosure: IP 67, IP 55 Trip torque: 250 to 1000 Nm Rebuild speed: 15 to 100 min−1 Scope of work. of revolutions: 1.25 to 500
Industry use: Energy Enclosure: IP 67, IP 55 Trip torque: 250 to 1000 Nm
View product View btn-arrow-small

Multi-turn electric servo drive UM 1-A

Industry use: Energy Enclosure: IP 68 Trip torque: 4 to 64 Nm Rebuild speed: 10 to 80 min−1 Scope of work. of revolutions: 3.125 to 160
Industry use: Energy Enclosure: IP 68 Trip torque: 4 to 64 Nm
View product View btn-arrow-small

An important fact of reliable operation is not only the correct design of fittings and servo drives, but also their subsequent care. With regular inspections and planned maintenance, you will prevent malfunctions and thus increase the reliability of the operation and extend its service life. For this purpose, the company REGADA also offers you comprehensive care of servo drives in your operation or just a selection from some of the listed services:

  1. Supervision during the first start-up of actuators in operation
  2. Connection and testing of actuators
  3. Connections and start-up of Rematic actuators - instruction
  4. Attaching the actuators to the valves and starting them
  5. Maintenance of actuators and periodic inspections
  6. Post-warranty repairs at the customer
  7. Post-warranty repair offer in Regada
  8. Training of service personnel
  9. Spare parts