Standard equipment and functions with DMS3 control unit

• Supply voltage 230 V AC
• Terminal board connection
• Thermal protection of the electromotor PTO (switch-off temperature 150°C)
• Switching off in limit positions from position and from torque
• Adjustable switching off from 50% to 100%
• Torque blocking in limit positions
• Torque blocking during the start
• 7 freely programmable relays R1, R2, RE1 ... RE5 (18 functions) (Not valid for Profibus and Modbus)
• 2 relays READY (Not valid for Profibus and Modbus)
• Control by unified signal 0/4 - 20 mA, 4 - 12 mA, 12 - 20 mA, or 0/2 - 10 V (Not valid for Profibus and Modbus)
• Control by permanent voltage (+24 V DC) - OPEN, CLOSE
• Impulse control (inching duty) (+24 V DC) - OPEN, STOP, CLOSE
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4 to 20 mA passive (not for DMS3 in 2P version) (Not valid for Profibus and Modbus)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs and transmitter
• Output of failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameterization setting a PC
• Mechanical connection according to ISO 5210, flange size F14, shape B1, B2, B3, C, D
• Mechanical connection according to ISO 5210, flange size F16, shape B2, B3, C, D
• Manual control
• Enclosure protection IP 67

Additional equipment

• Supply voltage 220 V AC, 380 V AC
• Reversing unit for 3-phase supply voltage
• Communication cable DB-9F/RJ45
• Mechanical connection according to ISO 5210, flange size F14, shape A
• Mechanical connection according to ISO 5210, flange size F16, shape A
• Mechanical connection acording to ГOCT P 55510, shape B, V
• Local control unit for actuators with DMS 3 system
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU