logo
  arrow-down
search
0 search
Your shopping cart is empty.
Home
Electric actuators
General industry, water and energy
Linear
STANDARD
Electric linear actuator ST 0.1

Electric linear actuator ST 0.1

Electric linear actuator ST 0.1

Type number: 498
Industry use: Energy, Water, Industry
Enclosure: IP 65, IP 67, IP 68
Cut-off thrust: 1900 to 7200 N
Operating speed: 10 to 63 mm/min
Working stroke: 0 to 50 mm
Weight: 5.4 to 8 kg
Ambient temperature: -25 to 55 °C
Work position: any, in a horizontal position with columns above each other

Hi, my name Is Marko. I will be happy to help/advise you

Ing. Marko Čižmárik

Standard equipment

  • Supply voltage 230 V AC
  • Terminal board connection
  • Thermal protection of the electromotor
  • 2 thrust switches
  • 1 position switch
  • Pillars mechanical connection
  • Local position indicator
  • Space heater with thermal switch
  • Manual control with permanent stand-by
  • Enclosure protection IP 65

Additional equipment

  • Supply voltage 220 V AC, 3x400 V AC, 3x380 V AC, 24 V AC, 24 V DC
  • Connector connection
  • Position transmitter:
    • single/double potentiometer 1x100 Ω, 1x2000 Ω, 2x100 Ω, 2x2000 Ω
    • electronic position transmitter, passive/active, 2-wire/3-wire, 0/4 to 20 mA from R/I converter (with/without source)
    • CPT, passive/active, 2-wire/3-wire, 4 to 20 mA (capacitive transmitter with/without source)
  • 2 additional position switches
  • Manual control without permanent stand-by
  • Mechanical flange connection
  • Gold coated contacts of microswitches
  • Enclosure protection IP 67, IP 68

Similar products

Control valves V41 115 540

Light: DN 15, DN 150 Work pressure: PN 40 Operating temperature: -50 to 400 °C Construction length acc: EN 558-1 Materials: Body - Steel 42 2643, Cone - Stainless steel, Saddle - Stainless steel
Light: DN 15, DN 150 Work pressure: PN 40 Operating temperature: -50 to 400 °C
View product View btn-arrow-small

Control valves V41 115 616

Light: DN 15, DN 150 Work pressure: PN 16 Operating temperature: 300 °C Construction length acc: EN 558-1 Materials: Body - Gray cast iron GG25, Cone - Stainless steel, Saddle - Stainless steel
Light: DN 15, DN 150 Work pressure: PN 16 Operating temperature: 300 °C
View product View btn-arrow-small

Bellows shut-off valves V25 115 540

Light: DN 15, DN 150 Work pressure: PN 40 Operating temperature: -20 to 400 °C Construction length acc: EN 558-1 Materials: Body - Steel 42 2643, Cone - DN 15 – 50 (Stainless steel), DN 65 – 150 (Carbon steel), Saddle - Stainless steel
Light: DN 15, DN 150 Work pressure: PN 40 Operating temperature: -20 to 400 °C
View product View btn-arrow-small

Shut-off valves V30 115 540

Light: DN 15, DN 150 Work pressure: PN 40 Operating temperature: -50 to 400 °C Construction length acc: EN 558-1 Materials: Body - Steel 42 2643, Cone - DN 15 – 100 (Stainless steel), DN 125 – 150 (Carbon steel), Saddle - Stainless steel
Light: DN 15, DN 150 Work pressure: PN 40 Operating temperature: -50 to 400 °C
View product View btn-arrow-small

Three-way regulating and closing valves 214, 224, 234 E (Ex)

Light: DN 15, DN 400 Work pressure: PN 6, PN 16, PN 25, PN 40 Operating temperature: -10 to 300 °C Connection parameters: ČSN-EN 1092-1/2 (flange type B1) Construction length acc: row 1 according to ČSN-EN 558
Light: DN 15, DN 400 Work pressure: PN 6, PN 16, PN 25, PN 40 Operating temperature: -10 to 300 °C
View product View btn-arrow-small

Two-way regulating and shut-off valves 210, 220, 230 E (Ex)

Light: DN 15, DN 400 Work pressure: PN 6, PN 16, PN 25, PN 40 Operating temperature: -10 to 150 °C Connection parameters: ČSN-EN 1092-1 (flange type B1) Construction length acc: row 1 according to ČSN-EN 558-1
Light: DN 15, DN 400 Work pressure: PN 6, PN 16, PN 25, PN 40 Operating temperature: -10 to 150 °C
View product View btn-arrow-small

Two-way regulating valves RV 113 R and three-way RV 113 M

Light: DN 15, DN 150 Work pressure: PN 6, PN 16, PN 25 Operating temperature: 150 °C Connection parameters: ČSN-EN 1092-1 (flange type B1) Construction length acc: row 1 according to ČSN-EN 558-1 + A1
Light: DN 15, DN 150 Work pressure: PN 6, PN 16, PN 25 Operating temperature: 150 °C
View product View btn-arrow-small

Two-way regulating valves RV 102 and three-way RV 103

Light: DN 15, DN 50 Work pressure: PN 16 Operating temperature: 150 °C Connection parameters: ČSN-EN ISO 228-1 resp. ČSN-EN 1092-1 Construction length acc: series M4 according to DIN 3202, series 1 according to ČSN-EN 558-1
Light: DN 15, DN 50 Work pressure: PN 16 Operating temperature: 150 °C
View product View btn-arrow-small

Category products

Electric linear actuator ST MINI

Type number: 472 Industry use: Energy, Water, Industry Enclosure: IP 67, IP 68 Cut-off thrust: 250 to 1100 N Operating speed: 5 to 40 mm/min
Type number: 472 Industry use: Energy, Water, Industry Enclosure: IP 67, IP 68
View product View btn-arrow-small

Electric linear actuator ST 0

Type number: 490 Industry use: Energy, Water, Industry Enclosure: IP 54, IP 67, IP 68 Cut-off thrust: 360 to 4500 N Operating speed: 5 to 40 mm/min
Type number: 490 Industry use: Energy, Water, Industry Enclosure: IP 54, IP 67, IP 68
View product View btn-arrow-small

Electric linear actuator ST 0.1

Type number: 498 Industry use: Energy, Water, Industry Enclosure: IP 65, IP 67, IP 68 Cut-off thrust: 1900 to 7200 N Operating speed: 10 to 63 mm/min
Type number: 498 Industry use: Energy, Water, Industry Enclosure: IP 65, IP 67, IP 68
View product View btn-arrow-small

Electric linear actuator ST 1

Type number: 491 Industry use: Energy, Water, Industry Enclosure: IP 65, IP 67, IP 68 Cut-off thrust: 2300 to 10000 N Operating speed: 8 to 80 mm/min
Type number: 491 Industry use: Energy, Water, Industry Enclosure: IP 65, IP 67, IP 68
View product View btn-arrow-small

Electric linear actuator UL 0

Type number: 540 Industry use: Energy, Water, Industry Enclosure: IP 66, IP 68 Cut-off thrust: 1400 to 6900 N Operating speed: 10 to 80 mm/min
Type number: 540 Industry use: Energy, Water, Industry Enclosure: IP 66, IP 68
View product View btn-arrow-small

Electric linear actuator UL 1

Type number: 541 Industry use: Energy, Water, Industry Enclosure: IP 66, IP 68 Cut-off thrust: 1400 to 12500 N Operating speed: 10 to 80 mm/min
Type number: 541 Industry use: Energy, Water, Industry Enclosure: IP 66, IP 68
View product View btn-arrow-small

Electric linear actuator UL 2

Type number: 542 Industry use: Energy, Water, Industry Enclosure: IP 66, IP 68 Cut-off thrust: 7000 to 25000 N Operating speed: 14 to 120 mm/min
Type number: 542 Industry use: Energy, Water, Industry Enclosure: IP 66, IP 68
View product View btn-arrow-small

Electric linear actuator MT 3

Type number: 52 400 Industry use: Energy, Water, Industry Enclosure: IP 67, IP 55 Cut-off thrust: 4800 to 36000 N Operating speed: 32 to 250 mm/min
Type number: 52 400 Industry use: Energy, Water, Industry Enclosure: IP 67, IP 55
View product View btn-arrow-small

Electric linear actuator ST 2

Type number: 492 Industry use: Energy, Water, Industry Enclosure: IP 65, IP 67, IP 68 Cut-off thrust: 9000 to 25 000 N Operating speed: 10 to 120 mm/min
Type number: 492 Industry use: Energy, Water, Industry Enclosure: IP 65, IP 67, IP 68
View product View btn-arrow-small

Electric linear actuator MTR

Type number: 52 420 Enclosure: IP 67, IP 55 Cut-off thrust: 4000 to 25000 N Operating speed: 32 to 120 mm/min Working stroke: 12.5 to 100 mm
Type number: 52 420 Enclosure: IP 67, IP 55 Cut-off thrust: 4000 to 25000 N
View product View btn-arrow-small

An important fact of reliable operation is not only the correct design of fittings and servo drives, but also their subsequent care. With regular inspections and planned maintenance, you will prevent malfunctions and thus increase the reliability of the operation and extend its service life. For this purpose, the company REGADA also offers you comprehensive care of servo drives in your operation or just a selection from some of the listed services:

  1. Supervision during the first start-up of actuators in operation
  2. Connection and testing of actuators
  3. Connections and start-up of Rematic actuators - instruction
  4. Attaching the actuators to the valves and starting them
  5. Maintenance of actuators and periodic inspections
  6. Post-warranty repairs at the customer
  7. Post-warranty repair offer in Regada
  8. Training of service personnel
  9. Spare parts