Air conditioning units

Air conditioning units

Function: 2 x 3/2 NC
DN and connection: 16 - 25 mm / G1/2 - G1
Work pressure: 0,2 - 0,8 MPa
Enclosure: IP 65
Ambient temperature: -5 to 50 °C
Media temperature: 2 to 60 °C
Standard voltage: 230 V - AC, 24 V - DC
Input: 15 VA; 10W
Load: 100 %
A type of media: filtered, oiled compressed air
Work position: vertical with coils above the valve

Similar products

Category products

Air purifiers

DN and connection: 10 – 16 mm / G3/8 – G1/2 Work pressure: 0 - 1 MPa Ambient temperature: 2 to 60 °C Flow: 150 to 175 m3/h Media temperature: 5 to 60 °C
DN and connection: 10 – 16 mm / G3/8 – G1/2 Work pressure: 0 - 1 MPa Ambient temperature: 2 to 60 °C

Reducing valves

DN and connection: 10 – 16 mm / G3/8 – G1/2 Ambient temperature: 5 to 60 °C Inlet pressure: 1,6 MPa Outlet pressure: 0.02 to 1 MPa Flow: 230 to 280 m3/h
DN and connection: 10 – 16 mm / G3/8 – G1/2 Ambient temperature: 5 to 60 °C Inlet pressure: 1,6 MPa

Air cleaners with a reduction valve

DN and connection: 10 – 16 mm / G3/8 – G1/2 Ambient temperature: 5 to 60 °C Inlet pressure: max. 1,2 MPa Outlet pressure: 0.02 to 1 MPa Flow: 190 m3/h
DN and connection: 10 – 16 mm / G3/8 – G1/2 Ambient temperature: 5 to 60 °C Inlet pressure: max. 1,2 MPa

Darlings

DN and connection: 10 – 16 mm / G3/8 – G1/2 Work pressure: max. 1 MPa Ambient temperature: 5 to 60 °C Flow: 100 m3/h Media temperature: 5 to 60 °C
DN and connection: 10 – 16 mm / G3/8 – G1/2 Work pressure: max. 1 MPa Ambient temperature: 5 to 60 °C

Air conditioning units

Function: 2 x 3/2 NC DN and connection: 16 - 25 mm / G1/2 - G1 Work pressure: 0,2 - 0,8 MPa Enclosure: IP 65 Ambient temperature: -5 to 50 °C
Function: 2 x 3/2 NC DN and connection: 16 - 25 mm / G1/2 - G1 Work pressure: 0,2 - 0,8 MPa

An important fact of reliable operation is not only the correct design of fittings and servo drives, but also their subsequent care. With regular inspections and planned maintenance, you will prevent malfunctions and thus increase the reliability of the operation and extend its service life. For this purpose, the company REGADA also offers you comprehensive care of servo drives in your operation or just a selection from some of the listed services:

  1. Supervision during the first start-up of actuators in operation
  2. Connection and testing of actuators
  3. Connections and start-up of Rematic actuators - instruction
  4. Attaching the actuators to the valves and starting them
  5. Maintenance of actuators and periodic inspections
  6. Post-warranty repairs at the customer
  7. Post-warranty repair offer in Regada
  8. Training of service personnel
  9. Spare parts